Nec xn120 manual. NEC XN120 User Manual 2019-01-24

Nec xn120 manual Rating: 6,2/10 1148 reviews

NEC XN120 User Manual

nec xn120 manual

Enter data for the next item in the program. The data in the Flash Memory is put by the Factory. Note: The items highlighted in grey are read only and cannot be changed. When programming, you make a separate entry for each Night Service Mode. Enter data for the next item in the program. Enter data for the next item in the program.

Next

NEC XN120 USER MANUAL Pdf Download.

nec xn120 manual

Input Data Incoming Ring Group Number 1-25 Incoming Ring Group No. Enter the number of the item you want to program. Enter data for the next item in the program. Input Data Trunk Group Number 1-25 Prog. Assign the type of service for the number dialed by the user internal call, service code etc. Input Data Extension Number Max. Selecting the first two digits lets you define codes based on the first two digits a user dials.

Next

NEC XN120 Manuals and User Guides, Telephone, Telephone Accessories, Telephone System Manuals — All

nec xn120 manual

If enabled, trunk-to-trunk transfer is not possible. Enter the number of the item you want to program. Input Data Abbreviated Dialing Bin Number 0-1999 Prog. The Barge In feature must be enabled if this option is to be used. Enter data for the next item in the program.

Next

Placing calls if your call doesn’ t go through

nec xn120 manual

Enter the number of the item you want to program. Input Data Class of Service Number 01-15 Prog. Enter data for the next item in the program. These patterns are used in Programs 12-03 and 12-04. Exit When the exit key is pressed the following screen will be displayed. Enter data for the next item in the program.

Next

NEC Xn120 Talk user manual

nec xn120 manual

Enter data for the next item in the program. Input Data Trunk Port Number 1-51 Prog. Enter data for the next item in the program. When users dial up the trunk group, they seize the trunks in the order you specify in the outbound priority entry. Slot Number Select the slot correct slot number with the Vol. Enter the number of the item you want to program. Press the key six times display the lower case letter.

Next

NEC Xn120 Talk user manual

nec xn120 manual

Enter data for the next item in the program. Enter the number of the item you want to program. Enter the number of the item you want to program. Refer to the Line Preference feature for more information. Changing Toll Restriction class while room is checked in The Toll Restriction class number can be changed for a room telephone when checked The Toll Restriction classes must be pre-defined in the system configuration, check. Input Data Door Box Number 1-6 Prog. This is because in the default program all the two digit codes between 0 and 9 are undefined.

Next

Placing calls if your call doesn’ t go through

nec xn120 manual

Up to 1000 systems can be registered. This is the Dial Type column in the System Numbering table. Input Data Class of Service Number 01-15 Prog. The call then continues ringing with the normal ring cadence cycle. Enter data for the next item in the program.

Next

Before using your telephone

nec xn120 manual

Along with the Description are the Conditions which describe any limits or special considerations that may apply to the program. The extension number cannot be duplicated in Programs 11-02, 11-06, 11-07 and 11-08. If the destination extension does not have a line or loop key available for the second call and a previous call is ringing the extension but has not yet been answered, the second caller will hear busy regardless of this programs setting. Enter the number of the item you want to program. Enter data for the next item in the program.

Next