Lever 2 is held automatically. Information entered is applied to the Job and Print Logs. Place the cut sheet paper on the table between its concerning size markings then insert it into the Bypass Feeder. Replace Print Trays in the original position. Line up Original Guides with the proper markings according to the original width. Remove all Print Trays 1. Service Interval Service Providers may configure the Service Interval to be automatically notified when the Printer is due for scheduled maintenance.
Place the original on the Original Table with face up. Once set, the Historical Queue will keep track of all submitted jobs and allow them to be called up again from within the Historical Queue and printed again as is or edited. When it does not reach Fuser Unit, toner on it may spill off. Transparent: This option overlays the stamp on top of the image. These stamps can be either Text, Graphics or both can be used.
By right clicking in the open white area a menu with available macros will appear. Pull up the Engine Unit Open Levers 2 to open the Engine Unit. This will highlight only the selected area and if Ok is selected at this point, will only scan this area. Press the levers 1 up to unlock the Scanner Unit. This forces the settings in the Pen Table to override the pen information originally embedded in the file.
Please read this Hardware Operation Guide carefully before using the printer. Depending on the selected location the value window may be utilized for more precise placement of the stamp. Support and Downloads Welcome to the Kyocera Download Centre. If the paper including any torn part can be removed, go to step 8. Remove both Flanges 4 from the roll core 3.
These files can now be printed using the File-To-Print functionality of the software or retrieved via Request or PrintNet. The Following section is used to set specific Keywords that can be used to customize the job ticket and control how the files are printed. Slide the green Cutter Knob 6 fully from one side to the other to make a new straight edge. There are several size markings on the table of Bypass Feeder which indicate possible feed positions. Scan entire file to e-mail or just a specific portion of the file by previewing the file and selecting an area of interest to scan to e-mail.
This machine will enter Sleep Mode after a certain period of inactivity. If the print including any torn part can be removed, go to step 8. When scan is completed it will appear in the Mailbox Queue. User is able to make changes regarding the Pen Table, Stamps, Fold, Output Rotation and Force Size settings. The user will be able to see all current Mailboxes, and select files that are present in that Mailbox for download.
Not doing so may cause a paper jam. Deck Info: Override the installed media per roll deck. Printer Queue Management The Printer Queue can be managed by an Administrator and allows the administrator to see where jobs are in the queue. Original Guide Original Guide 2. Shake the new Toner Cartridge left and right 5 times or more to make the toner smooth. If necessary, press the Emergency Stop Button 1 on the Scanner Unit to immediately stop the original while making a copy or scan. Click on the mailbox folder that contains the images sent via e-mail to the printer.
Also, do not install the printer on an unstable floor as injuries may occur. The desired files may also be downloaded to a. Insert the leading edge of the roll media under Guide Plate 2 until it touches the feeding roller. With the E-mail Plug-in settings in PrintNet set to Create Job do the following: 1. If the mis-fed paper cannot be seen or removed, leave the media and go to the next step. If line specified is thinner than configured setting, line thickness will be increased.
Save Job When logged on as a standard user, select this option to save the current print job along with the printing parameters. Turn the body 4 of the cartridge in one revolution to the arrow direction to open the toner supply hole. No operation should be done by the customer. The current printing is stopped as well and is ejected. Ensure that the machine is plugged into a dedicated wall outlet.
Insert each Flange 2 into both ends of the roll media core to be installed. Lift the roll media by holding both Flanges. Inside Rim Inside Rim Correct: Fully inserted. Pull up the Engine Unit Open Levers 2 to open the Engine Unit. Historical Queue The Historical Queue displays a list of jobs that have been printed in the past.